Components of the conventional parallel lathe
Posted: Wed Jan 22, 2025 8:29 am
The turning head includes the spindle and all the mechanical devices for converting the rotation of the electric motor into the rotary movement of the spindle as well as into the rectilinear movements of the guides.
Another parameter to consider in the parallel lathe is the tool feed movement, which often represents a movement in a direction parallel to the Z axis or the spindle axis. In the case of planing machining operations such as faceting, the tool movement is perpendicular to the lathe axis. In this case, we speak of a transverse feed.
Other important components include the tool carriage consisting of two slides; canada email list the first for longitudinal movements (along the Z axis) and the second for transverse movements.
The tool tip is at the same height as the Z axis, but sometimes it is slightly higher in the case of roughing or finishing operations.
The tool carriage operates either manually or mechanically through a system of mechanical gears that transmits the movement of the spindle motor to the carriage. In this situation, the speed will be proportional to the rotation speed of the workpiece through a series of interchangeable wheels.
Another parameter to consider in the parallel lathe is the tool feed movement, which often represents a movement in a direction parallel to the Z axis or the spindle axis. In the case of planing machining operations such as faceting, the tool movement is perpendicular to the lathe axis. In this case, we speak of a transverse feed.
Other important components include the tool carriage consisting of two slides; canada email list the first for longitudinal movements (along the Z axis) and the second for transverse movements.
The tool tip is at the same height as the Z axis, but sometimes it is slightly higher in the case of roughing or finishing operations.
The tool carriage operates either manually or mechanically through a system of mechanical gears that transmits the movement of the spindle motor to the carriage. In this situation, the speed will be proportional to the rotation speed of the workpiece through a series of interchangeable wheels.